The DryFireMag is the original dry fire magazine that resets the trigger in your pistol, so you can dry-fire practice without racking the slide between trigger pulls. Therefore, the practice does not instill the dangerous muscle memory of racking the slide between rounds. The DryFireMag not only resets the trigger, but simulates a true dry fire trigger-break by closely replicating the feel of your trigger. Since the DryFireMag does not engage the firing pin, there is no wear on it.
There is a difference not only in appearance, but performance. The most notable differences in appearance can be seen on the rear of the mags for Glock, and on the front of the mags for SIG.
No. No DryFireMag, original or Smart, will activate a “firing-pin-activated” laser. The firing pin is not engaged when using any DryFireMag. The Smart Mag activates only a Smart Laser or the “designed for SMART DryFireMag SureStrike laser” by Laser Ammo.
There Is Still A Lot I Don’t Understand About The Smart DryFireMag. Can you steer me to a product video?
SMART MAG SHOW & TELL
https://rumble.com/v3i1nyg-smart-dryfiremag-c-laser-ammo-show-and-tell.html
SMART MAG FAQS
https://rumble.com/v3oomn4-faqs-about-the-latest-smart-dryfiremag-with-laser-ammos-laser-cartridge.html
DryFireMag does not guarantee the MantisX system will work with the DryFireMag for the simple reason that it is not our product. However, we have found this to be a great training combination.
For instruction on how to make the combo work, please see the videos at the links below:
HOW TO APPLY THE MANTIS ADAPTER TO THE DRYFIREMAG
Do NOT put any screws into the bottom of the plate! Use Mounting Tape Only
https://rumble.com/v493j0b-how-to-get-a-mantisx-adapter-onto-the-dryfiremag.html
CONFIGURING THE MANTIS TO WORK WITH THE DRYFIREMAG
https://rumble.com/v2szpdi-configuring-the-mantisx-app-to-work-with-dryfiremag.html
The DryFireMag works fine with most performance triggers (Apex, Zev, Powder River, etc.). The DryFireMag is easily adjusted to accommodate the “break-point” of custom triggers. With the addition of the optional Spring Pak, the DryFireMag easily adapts to most custom trigger-pull weights.
https://rumble.com/v1posiz-what-is-the-spring-kit-all-about. html
The Spring kit allows you to tune your DryFireMag’s trigger weight just the way you want it, or to the specs your academy or department requires. Check out the product details to see the trigger weights achievable with each spring in the kit. There is currently a kit for Glock, S&W M&P and Sig Sauer P320 DryFireMag. Of course you are free to do what you like with the springs in any kit, with any DryFireMag that will accept a spring.
It depends on your gun’s frame size. Most DryFireMag models are designed to fit the makers’ standard or full-size model. If you have a compact, or subcompact model; the DryFireMag can still operate with your firearm though it may protrude past the gun grip.
The DryFireMag is designed to simulate at least a partially loaded magazine, no heavier.
No. The DryFireMag will not free fall from the magazine well because it has to interact with the trigger mechanism. It must be stripped from the pistol. Stripping and throwing the DryFireMag onto hard surfaces could damage the DryFireMag.
Yes, we are excited to let you know that the DryFireMag and Virtual-Shot work very well together!
Using Virtual-Shot is a fun and interactive way to use your DryFireMag!
No. The DryFireMag does not use the firing pin, because all the mechanism is contained within the body of the mag. The DryFireMag only interacts with the trigger mechanism.
No, because the lever that interacts with the trigger mechanism is a softer material than the trigger mechanism. Any wear would take place on the DryFireMag lever and not on the trigger mechanism.
No. Nothing will ever exactly duplicate your trigger. The DryFireMag is able to simulate your trigger’s pre-travel, wall, break and the reset of your trigger.
The DryFireMag can be finely adjusted to replicate most pistol trigger systems. Instructions are included in the package and can be found HERE. If you need further assistance, you may call DryFireMag Tech Support at 844-844-4240.
This is not yet determined. We have had units being used for 7+ years by some of our customers who do thousands of reps per week, and they are still going. It is warranted against defect for 1 year.
Phone: 844-844-4240
Email: TechSupport@DryFireMagService.com
Contact Us page: https://www.dryfiremag.com/contact-us/
The Standard DryFireMag can not be upgraded to be a Smart DryFireMag.
The DryFireMag comes with a one-year part and mechanism warranty. You will need to fill out
this form
for the warranty to be honored. We will need your name and
the email address that you used to order, or the order number from dryfiremag.com.
Yes. There is a 30 day period to try the DryFireMag.
Our policy is to ship the next business day after the order is placed (Monday thru Friday). If ordered from DryFireMag.com, you will receive your DryFireMag as fast as, if not faster than Amazon Prime delivery unless there are US postal delays.
Yes. Military, LEO’s, firefighters, and certified firearm instructors, after sending verification, such as a picture of their ID (see instructions at checkout), will normally receive a $10.00 discount. During special sales events, this amount may vary. This discount is offered to individuals and does not apply to bulk discount orders.
Yes. Please contact us for more information.
Each DryFireMag comes with its own particular set of instructions, as the mags vary. You will want to read those. For video help, please reference the appropriate link below:
HOW TO PROPERLY LOAD THE DRYFIREMAG FOR GLOCK
https://rumble.com/v5xo7wt-how-to-install-your-dryfiremag-for-glock.html
HOW TO PROPERLY LOAD THE DRYFIREMAG FOR SIG SAUER
https://rumble.com/v5xuhdw-how-to-install-the-dryfiremag-for-sig.html
HOW TO PROPERLY LOAD THE DRYFIREMAG FOR S&W M&P
https://rumble.com/v5y473h-how-to-load-and-adjust-the-dryfiremag-for-s-and-w-m-and-p.html
HOW TO PROPERLY LOAD THE DRYFIREMAG FOR PSA DAGGERS
https://rumble.com/v5ycxpq-how-to-properly-install-the-dryfiremag-for-psa-pistols..html
First, if your new mag is for a SIG; you will want to make sure that you have applied the correct spacer (or left only the correct spacer on the mag).
HOW TO APPLY THE APPROPRIATE SPACER TO YOUR DRYFIREMAG FOR SIG
https://rumble.com/v41ad6v-applying-the-spacer-on-the-p9-dfm-dfm-for-sig-p320.html
For video help to adjust your mag in the event it is not resetting your trigger, or the break and/or pull weight is not matching your true dry fire; see the respective video at one of the links below:
DIALIN’ IN YOUR DRYFIREMAG FOR GLOCK
https://rumble.com/v22vw1o-dialin-in-your-new-dryfiremag-for-glock-g9-double-stack.html
DIALIN’ IN THE DRYFIREMAG FOR YOUR SIG
https://rumble.com/v1r78wm-dialin-in-your-new-dryfiremag-for-the-sig-p320.html
HOW TO PROPERLY LOAD AND ADJUST THE DRYFIREMAG FOR S&W M&P
https://rumble.com/v5y473h-how-to-load-and-adjust-the-dryfiremag-for-s-and-w-m-and-p.html
ADJUSTING THE TRIGGER-PULL-WEIGHT BY CHANGING OUT THE COIL SPRING
https://rumble.com/v1posiz-what-is-the-spring-kit-all-about.html
This is most likely due to either a trigger-break adjustment issue, laser timing adjustment issue, or both. You will first want to make sure that your trigger is breaking in the same place when the DryFireMag is engaged, as it does during true dry fire. Then you may need to adjust the laser timing. Please see the appropriate video at one of the links below, depending on your firearm:
TROUBLE-SHOOTING THE SMART MAG FOR GLOCK
https://rumble.com/v3j1u7y-trouble-shooting-the-sdfm-smart-dryfiremag-with-laser-ammo-cartridge.html
GETTING STARTED RIGHT WITH THE SMART MAG FOR SIG
https://rumble.com/v5dprgx-trouble-shooting-the-smart-dryfiremag-for-sig-and-how-to-get-started-right.html?e9s=src_v1_ucp
Most likely only a very slight adjustment is required to make your DryFireMag feel just right. Very slight adjustments can make a world of difference. Please refer to the appropriate video at one of the links immediately above:
If you need even further assistance getting your DryFireMag adjusted properly, please contact Tech Support: Phone: 844-844-4240 Email: TechSupport@DryFireMagService.com
If you have the Mantis10, make sure your app is configured such that the
Shot Detection Mode = SIRT/DryFireMag.
For earlier versions: set the Detection Sensitivity = HIGH, Detection Delay = ON
(~0.7 seconds works well to avoid trigger reset detection), Practice = DRY
Helpful Video:
This video will show you step by step instructions how to configure your MantisX app for the MantisX (X2 – X10 Elite) to work with your DryFireMag.
Most DryFireMag models are designed to fit the makers’ standard or full-size model. If you have a compact, or subcompact model; your DryFireMag can be “seated” correctly even though it is protruding past the gun grip. If your mag-release has popped fully out, and you are unable to pull the DryFireMag back out without pressing the mag-release; then your DryFireMag is in as far as it should go. If you have a DryFireMag for Sig, you will want to make sure that you have the correct spacer fitted to your mag (supplied).
See the following video for assistance:
https://rumble.com/v41ad6v-applying-the-spacer-on-the-p9-dfm-dfm-for-sig-p320.html
For video assistance on how to install your particular mag, see FAQ How do I install my new DryFireMag?
It’s likely that either the wrong mag was ordered, or we inadvertently shipped the wrong mag.
Please contact us with the make and model of your firearm and report the model DryFireMag stamped on the DryFireMag box that you received so we can get it “ironed out”.
Yes! https://www.dryfiremag.com/product/gift-card/
Yes! https://www.dryfiremag.com/affiliates/
Apply to become a DryFireMag dealer by clicking here. You will be contacted with dealership details.
